Filter
Top Products
The LCD Console 3-13
The LCD Console
This section describes the LCD Console. The LCD
Console allows you to enter specific configuration
parameters and obtain status data on the Switch
2000 TR without using a management workstation
console or application.
Figure 3-9 Switch 2000 TR LCD Console
Use the left, right, up, down, and enter buttons to
view, enter, edit, or delete configuration parameters.
■ Unit ID
■ IP and associated addresses and management
■ Port personality, speed, state
■ Bridge type and Spanning Tree state
■ Switch status; hardware and software versions
LCD Console Buttons
Enter
Use this button to accept or change data on any field
or scroll further down in LCD menu.
Left Arrow
Use the left arrow to go to the previous menu.
Right Arrow
Use the right arrow to move to a specific digit on any
data field line.
Up Arrow
Use the up arrow to scroll up in a specific menu or to
decrease the value of a highlighted digit.
Down Arrow
Use the down arrow to scroll down in a specific menu
or to increase the value of a highlighted digit.
ENTER
Switch 2000 TR
Unit Id: 1
Switch 2000 TR
Unit Id. 1
ENTER