Filter
Top Products
3
UPGRADING MEMORY
The following memory upgrades are available from 3Com for your
bridge/router:
■ 4 MB (3C8104) flash memory
■ 4 MB DRAM (3C8040)
Complete the following sections to install flash memory or DRAM in
your SuperStack II bridge/router.
CAUTION: If you install the flash memory upgrade and then remove it
from your system after startup, you will need to reload the system
software using the procedures described in the software guide.
Removing the
Cover
1 Turn off the power and unplug the power cord from your SuperStack II
bridge/router. Unplug the RPS cable, if connected.
2 Remove the two screws on the back of the bridge/router.
3 Slide the cover back and up off the bridge/router.
Remove these two screws
MODEL: ESPL-310
REMOTE OFFICE
NETBUILDER
327
S/N:
1SC05427
100-240VAC, 50/60HZ, 1.0-0.5A
250V, F2A
8.3
FOR CONTINUED PROTECTION
AGAINST FIRE HAZARD
REPLACE FUSE ONY WITH
SAME TYPE AND RATING
NTWK
ADDR:
3COM CORP.
SANTA CLARA, CA. MADE IN USA
080002 04BA1E LAN
04BA1F
04BA20
04BA21
WAN-A
WAN-B
WAN-C
20-0261-000
07/31/95
SS2TRHWBook Page 1 Monday, May 5, 1997 3:11 PM