Filter
Top Products
70 CHAPTER 4: CONFIGURING THE SWITCH
■ Reauthentication Period – Sets the time
period after which a connected client must
be re-authenticated. (Range: 1-65535
seconds; Default: 3600 seconds)
■ Quiet Period – Sets the time that a switch
port waits after the Max Request Count has
been exceeded before attempting to acquire
a new client. (Range: 1-65535 seconds;
Default: 60 seconds)
■ Transmit Period – Sets the time period
during an authentication session that the
switch waits before re-transmitting an EAP
packet. (Range: 1-65535; Default: 30
seconds)
After you have filled in the parameters, click
Apply to save your changes.
Figure 61 802.1X Setup Screen
Monitoring
Using the Web interface, you can display
address table information and cable
diagnostics.
The Monitoring menu includes two items:
■ Address Table
■ Cable Diagnostics
Address Table
Use the Address Table Summary screen to
display the Address Table information. You can
query by selecting a port, choosing a VLAN, or
entering in a MAC Address, then click Select.