Accessing the Setup Wizard 33
PPPoA Mode
To set up the Router for use with a PPP over ATM (PPPoA) connection, use
the following procedure:
Figure 20 PPPoA Screen
1 Enter your user name in the Username field.
2 Enter your password in the Password field.
3 Re-type your password in the Retype Password field.
4 Enter your VPI and VCI information in the VPI/VCI fields.
5 Select the encapsulation type (LLC or VC MUX) in the Encapsulation
drop-down menu. This information should be provided to you by your ISP.
6 Check all of your settings, and then click Next.
The LAN Settings screen will then be displayed (refer to Figure 24
).