Filter
Top Products
Advanced 91
You can configure your Router to send status messages to the SNMP
management agent if a problem occurs on the network. To configure
SNMP traps:
1 In the IP Address field, enter the IP address of the PC to which you want
your Router to send status messages.
2 In the Community field, enter the name of the SNMP communication
channel to which you want your Router to send status messages.
3 Set the Version field to match the version of trap messaging that your
SNMP management agent supports. The Router supports V1 and V2c
trap messaging.
Syslog Using third party syslog software, this Syslog Server tool will automatically
download the Router log to the specified server IP address.
Figure 76 Syslog Server Screen
1 Check the Enable Syslog Server checkbox.
2 Enter the Server LAN IP Address in the space provided.
3 Click Apply.