Internet Settings 55
PPPoE
PPP over Ethernet, provides routing for multiple PCs. To configure this
function correctly, you should obtain the information from your ISP.
Figure 45 PPPoE Settings Screen
1 Select PPPoE from the Protocol drop-down menu.
2 Enter the IP address and Subnet Mask information provided by your ISP
into the IP address and Subnet Mask fields.
3 Enter the user name assigned to you by your ISP in the Username field.
And enter the password assigned to you by your ISP in the Password field.
Re-enter your password in the Confirm Password field.
4 Select the connection type from the Connect Type drop-down menu.
■ Always Connected means that Internet connection to your ISP is
always on.
■ Auto - Triggered by Traffic means your Router will automatically
connect to your ISP every time a PC needs to access the Internet.
■ Manual - Start in Disconnected means that after re-booting the
Router, the Internet connection will need to be re-established
manually by the user.
■ Manual - Start in Connected means that after re-booting the
Router, it will automatically establish a connection to your ISP.