3Com 3CRWDR101A-75 Network Router User Manual


 
Wireless Settings 49
WPA (with RADIUS Server)
WPA (Wi-Fi Protected Access) provides dynamic key changes and
constitutes the best security solution. This function requires that a
RADIUS server is running on the network.
Figure 37 WPA (with RADIUS Server) Screen
1 Select WPA with RADIUS server from the Security Mode drop-down
menu.
2 Select WPA mode from the drop-down menu, three modes are
supported: WPA, WPA2, and Mixed mode.
3 Select Encryption technique from the drop-down menu, four options are
available: TKIP, AES, Auto for WPA AES for WPA2, and AES for both WPA
and WPA2.
4 Enter the IP address of the RADIUS server on your network into the
RADIUS Server field.
5 Enter the port number that the RADIUS server is operating on in the
RADIUS Port field.
6 Enter the key for the RADIUS server in the RADIUS Key field.
7 By default, the WPA keys are changed every hour, but if you want to
change this setting, you can do so by specifying the required time in the
Re-key Interval field.
8 Click Apply.