Filter
Top Products
24 CHAPTER 3: INSTALLING THE NETWORK DRIVER
2 Check the version number on the General screen,
under System:
■ If 4.00.950 or 4.00.950A is displayed, follow the
procedure for Windows 95 Version A.
■ If 4.00.950B is displayed, follow the procedure for
Windows 95 Version B.
Windows 95 Version A
To install the network driver in a PC running version A of
Windows 95:
1 Make sure that the NIC is installed in your PC and that
it’s connected to the network, as described in Chapter 2.
2 Turn on the power to the PC.
Windows 95 detects the NIC and displays the
New Hardware Found dialog box (Figure 5), prompting
you for the driver you want to install for your new
hardware.
Figure 5 New Hardware Found Dialog Box
3 Select Driver from disk provided by hardware
manufacturer, and then click OK.
The Install from Disk dialog box appears.