Filter
Top Products
Fabric Modules 19
■ Console port
The Console port uses an RJ-45 connector. It can be connected to a background
terminal for system debugging, maintenance, management, and host software
loading.
n
You can choose your own baud rate for the Console port.
■ AUX port
The AUX port uses an RJ-45 connector. The port can serve as a backup port for the
Console port to connect a background terminal, or directly connect a modem
device, for remote system debugging, configuration, maintenance and
management.
RESET button
You can press the RESET button on the panel to reset the 360 Gbps Switch Fabric
module.
Status LEDs
■ CF status LED
You can learn the operating status of the CF card by reading the CF status LED on
the panel.
Service The port for monitoring and communication with the external subsystem,
such as external PoE power supply module
Table 9 Console port specifications
Item Description
Connector RJ-45
Standard Asynchronous EIA/TIA-232
Baud rate 9600 bps (default)
Transmission
segment
15 m (49 ft.)
Service Connects a serial port of a local PC and runs terminal emulation on the
PC.
Table 8 RS232/485 port specifications
Item Description
Table 10 AUX port specifications
Item Description
Connector RJ-45
Standard Asynchronous EIA/TIA-232
Service Connects a serial port of a PC (through a Modem pair for a remote PC) and runs
terminal emulation on the PC.