Filter
Top Products
24 CHAPTER 1: PRODUCT OVERVIEW
You can learn the operating status of 720 Gbps Switch Fabric module by reading
the SFS, ACT, ALM and RUN LEDs on it. The following table gives a summary of
the four LEDs.
RESET button
You can press the RESET button on the panel to reset the 720 Gbps Switch Fabric.
Status LEDs
See the section “Status LEDs” on page 19.
System Specifications The following table summarizes the physical specifications of the Switch 8800
Family.
Table 22 Status LEDs for the 720 Gbps Switch Fabric module
360 Gbps Switch
Fabric LED
Status
SFS ON The switching fabric unit is active.
OFF The switching fabric unit is standby.
RUN Green The 720 Gbps Switch Fabric module is faulty.
OFF The 720 Gbps Switch Fabric module is faulty.
Green blinking The 720 Gbps Switch Fabric module runs normally.
ALM Red The 720 Gbps Switch Fabric module has alarms.
OFF The 720 Gbps Switch Fabric module has no alarms.
ACT Green The 720 Gbps Switch Fabric module is active.
OFF The 720 Gbps Switch Fabric module is standby.
Table 23 Technical specifications of the Switch 8800 Family
Item Switch 8807 Switch 8810 Switch 8814
Dimensions
(H x W x D)
486 x 436 x 450 mm
(19.1 x 17.2 x 17.7
in.)
619 x 436 x 450 mm
(24.4 x 17.2 x 17.7
in.)
753 x 436 x 450 mm
(29.6 x 17.2 x 17.7 in.)
Weight (full load) 600 kg (143 lb) 80 kg (176 lb) 100 kg (220 lb)
Max power
consumption
1200 W 2000 W 2000 W
Switching
capacity (see
Note 1)
Fab360: 600 Gbps
(see Note 2)
Fab360: 480Gbps
Fab720: 960Gbps
Fab360: 720Gbps
Fab720: 1440Gbps
Number of
VLANs
4 K
Maximum MAC
address table size
14 K/per module, total 14 K x number of modules
See Note 3
Forwarding table
entries
128 K/256 K
Number of fabric
slots
2 2 2