Filter
Top Products
Installing the Network Interface 9
Before installing network components, consult with your network manager or MIS
representative for the options you require for your network.
1 Open the Network window by double-clicking the Network icon in the Control
Panel.
2 Click Add to add new or additional network components.
Some networks do not require all four components. Table 2 shows which
components are required for four widely used network types.
3 Each time you add one of these components, Windows 95 creates a new entry in
the Network window. As these components are added, you may be asked to
provide:
■ NetWare or Microsoft client software on hard disk, floppy disks, or CD
■ Windows 95 system installation files on hard disk, floppy disks, or CD
■ The Windows 95/98 Installation Disk that came with your LAN+Modem
card
Table 2 Adding Network Software Components
Type of Network Component Manufacturer Option to Select
Microsoft Networking and Netware Adapter 3Com 3Com 10/100 LAN +
56K Modem CardBus PC
Card
Microsoft Networking (for Windows 95,
Windows NT, and Windows 98)
Client Microsoft Microsoft Client for
Microsoft Networks
Protocol Microsoft NetBEUI
Service Microsoft File and printer sharing
for Microsoft Networks
NetWare for Bindery (for NetWare 3.x and
NetWare 4.x in bindery mode)
Client Microsoft Microsoft Client for
NetWare Networks
Protocol Microsoft IPX/SPX-compatible
Protocol
NetWare Directory Services (NDS) (for
NetWare 4.x)
Client Microsoft Microsoft Client for
NetWare Networks*
Novell Novell NetWare 32-bit
Client*
Protocol Microsoft IPX/SPX-compatible
Protocol*
Novell IPX/SPX Protocol*
Service Microsoft
Novell
Service for NetWare
Directory Services*
TCP/IP
(for UNIX® networking)
Client Microsoft Microsoft Client for
Microsoft Networks
Protocol Microsoft TCP/IP
* Download software from the indicated manufacturer’s BBS or World Wide Web site.