Filter
Top Products
4
C
HAPTER
1: I
NSTALLING
AND
C
ONNECTING
THE
C
ARD
LAN Connector LEDs
The LEDs on the network connector display the status of your network link.
Figure 4
LEDS
You can use the LEDs to verify link integrity, but the LAN+Modem card must be
connected to the network and the network drivers must be installed. For
information on installing drivers, see:
■
“Windows 95” on page 7
■
“Windows 98” on page 15
■
“Windows NT” on page 21
Table 1
LAN Connector LEDs
LED Description Steady Off
10 LNK Link integrity Good 10BASE-T
connection between PC
Card and hub
No connection between card
and hub. (Off when 100 LNK
LED is on.)
100 LNK Link integrity Good 100BASE-TX
connection between PC
Card and hub
No connection between card
and hub. (Off when 10 LNK
LED is on.)