Filter
Top Products
16 M170 FPD Monitor Installation Guide
Countertop Base Mounting Option
Keyhole slots in the bottom of the base plate enable you to secure the unit to a desktop or
countertop. Use standard screws in the desktop or countertop and then slide the base plate
on for a secure fit.
Note: A full size template has been included in the back of this manual for your convenience.
Simply tear out the template and drill directly through the holes indicated to secure your monitor
to any surface.
Access to the Video Controls
The controls for adjusting the video display are located on the front of the M170 FPD
monitor. These buttons let you display the on-screen menu which enables you to adjust
the phase, image position, and contrast, as well as hot keys for volume, auto adjust and
brightness. Make sure you have unobstructed access to the video controls once the M170
monitor is installed. Refer to Chapter 3 for more information on these controls.
Adjusting the Viewing Angle
The base and support rods were designed with touch stability in mind. This innovative
design keeps the monitor face stable during touch. The unit can be adjusted to any locked
position from -5 up to 90 degrees from vertical. This allows for users of different heights
to view the monitor at the angle that best suits them with no degradation in touch
stability.
Always maintain adequate ventilation to protect the display from overheating and to
ensure reliable and continued operation.
3M Touch Systems Proprietary Information