Filter
Top Products
15
3M
™
Multimedia Projector MP7760
© 3M IPC 2000
uneMniaM noitcA/noitpircseD gnitteStluafeD
erutciPunem-buserutcipyalpsiD
slooTunem-busslootyalpsiD
ecruoslangiS
)wodniwnwodpord(
ecruostupnitceleS
)XUA/OEDIV/SHVS/BGR/CP(
hcraesotgnidroccA
erudecorp
ecafretnIresUunem-busecafretniresuyalpsiD
pu-teSdecnavdAunem-buspu-tesdecnavdayalpsiD
ofnI
wodniwnoitamrofniyalpsiD
sserp(retnE)
erutciP
)BGR/CP(
smetIuneM-buS
noitcA/noitpircseDgnitteStluafeD
ssenthgirBssenthgirbehttsujdA
tsartnoCtsartnocehttsujdA
ezimitpOegamirofssenthgirbtsebsehcraeS
noitisoP.roHegamifonoitisoplatnozirohtsujdA
gnikcarTenilrepslexipforebmuntsujdA
cnySnoitazinorhcnysesahptsujdA
edoM
sihtnihtiwtsujdaotedomatadtceleS
edoMresU/sedomdenifederP(unem
)3...1
>citamotuA<
noituloseR
)wodniwnwod-pord(
/053x046(noituloserlexiptceleS
/004x027/004x046/053x027
/078x2511/468x2511/867x4201
)4201x0821/069x0821/009x2511
Sub-Menu: Select the desired sub-menu (see Main Menu). Press the Disc Pad or Joystick to the right or the
Enter button to display the sub-menu.
The sub-menu name is on the top line.
A check box field at the right of a sub-menu line indicates
that you can toggle that value On/Off by pressing the Enter
button.
A slider bar at the right of a sub-menu line indicates you can
increase or decrease the value.
A number field at the right of a sub-menu line indicates that
you can change it.
To change a slider bar value, it must be highlighted. Press the -/+ button on the remote control or on the
operator touch panel to decrease or increase the value.
To change a number field, press the Disc Pad or Joystick up or down to highlight (select) the menu line.
Then press the -/+ button on the remote control or on the operator touch panel to decrease or increase the
amount of the value.
4-5. Menu Adjustments/Settings
The following charts lists all the menu items that can be adjusted along with the default settings.
Section 4: Operating Instructions
In active PC/RGB mode