Filter
Top Products
9
3M
™
Multimedia Projector MP7760
© 3M IPC 2000
Section 3: Set-Up/Connections
3-1. Terminal Connection Panel
The MP7760 projector has terminal connections on the backside of the projector. Refer to Section 3.4-Cable
Connections for more detail.
Figure 3-1. Input Connection Terminals
1. SVHS: S-VHS video input.
2. VIDEO IN: Composite video input.
3. AUDIO IN: Audio input (Stereo converted to mono).
4. AUX IN: Auxilary/Camera input. Only compatible with 3M devices.
5. PC/RGB IN: RGB video input from computer.
6. RS-232C (Serial Port): Mouse emulation/External projector control.
7. USB: USB-Mouse emulation output.
8. Kensington Security Lock (Anti-theft protection)
3-2. Operator Touch Panel Keypad
The MP7760 operator touch panel keypad (Figure 3-2) is
located on top of the projector.
Refer to Section 4 for more detail on using the keypad.
1. Standby: Switch between standby mode (lamp off, fan
off after cool down) and projection mode (lamp on, fan on).
2. Menu: Display/remove menus.
3. Enter/Source: Initiate drop windows, toggle check box
(On/Off), display Info sub-menu in menu mode.
Toggles input source outside menu mode between: PC/RGB,
Video, S-VHS and AUX input.
4. Disc-Pad: Move cursor up/down, left/right.
5. -/+: Decrease/increase menu value in menu mode. Decrease / increase volume outside menu mode.
Figure 3-1. Input Connection Terminals
Figure 3-2. Operator Touch Panel