Filter
Top Products
CHAPTER 2: NETWORK SETUP SET UP THE NETWORK FOR AUTHENTICATION
8E6 TECHNOLOGIES, R3000 ENTERPRISE FILTER AUTHENTICATION USER GUIDE 63
Invisible mode
For the LAN1 IP (eth0) address, select 255.255.255.255 for
the subnet mask, and click Apply.
Router or firewall mode
1. Enter the following information:
• In the LAN1 IP (eth0) field of the IP/Mask Setting
frame, enter the IP address and specify the corre-
sponding subnet of the “eth0” network interface card to
be used on the network.
• In the LAN2 IP (eth1) field, enter the IP address and
specify the corresponding subnet of the “eth1” network
interface card to be used on the network.
TIP: The LAN1 and LAN2 IP addresses should usually be placed
in different subnets.
• In the Primary IP field of the DNS frame, enter the IP
address of the first DNS server to be used for resolving
the IP address of the authentication server with the
machine name of that server.
• In the Secondary IP field of the DNS frame, enter the
IP address of the second DNS server to be used for
resolving the IP address of the authentication server
with the machine name of that server.
• In the Gateway IP field of the Gateway frame, enter
the IP address of the default router to be used for the
entire network segment.
2. Click Apply to apply your settings.
NOTE: Whenever modifications are made in this window, the
server must be restarted in order for the changes to take effect.