Filter
Top Products
CHAPTER 2: NETWORK SETUP SET UP THE NETWORK FOR AUTHENTICATION
8E6 TECHNOLOGIES, R3000 ENTERPRISE FILTER AUTHENTICATION USER GUIDE 65
4. In the 8e6 Authenticator frame, be sure the 8e6 Authen-
ticator is “On”—unless the Novell eDirectory Agent
option will be used instead. When enabling the 8e6
Authenticator option, and then downloading and
installing the 8e6 Authenticator (authenticat.exe) on a
network share accessible by the domain controller or a
Novell eDirectory server, the 8e6 Authenticator automat-
ically authenticates the end user when he/she logs into
his/her workstation.
5. If you have a Novell eDirectory server and the 8e6
Authenticator will not be used, turning “On” Novell
eDirectory Agent will enable end user logon and logoff
events to be logged. To use this option, the LDAP domain
must be set up and activated in the Group tree.
WARNING: When enabling Novell eDirectory Agent, the agent
will immediately begin scanning Novell eDirectory-based domain
labels.
6. If using Tier 1, in the Sending Keep Alive frame, click
"On" to specify that keep alives should be sent on a
connection to verify whether it is still active. Click "Off" to
specify that the end user's session will be kept alive
based on the number of minutes entered in the text box.
7. Click Apply.