Filter
Top Products
Features in Release 2.2
RN-001029-00, Rev 06, Release 2.2 111
5i Series IP Phone Release Notes
Configuring HTTP and HTTPS Port Using the Aastra Web UI
Use the following procedure to configure the HTTP or HTTPS port using the
Aastra Web UI.
.
Aastra Web UI
Configuring HTTP Port
1 Click on Advanced Settings->Configuration Server->Settings.
2 In the “Download Procotol” field, select HTTP.
3 In the “HTTP Server” field, enter the HTTP server that downloads the configuration to the phone.
Enter the value in the format 0.0.0.0. For example, 10.40.50.90.
4 In the “HTTP Path” field, enter the HTTP path of the HTTP server.
If the IP phone’s configuration and firmware files are located in a sub-directory beneath the server’s
HTTP root directory, the relative path to that sub-directory should be entered in this field.
5 In the “HTTP Port” field, enter the HTTP port that the server uses to download the configuration to
the phone. Default value is 80. Valid values are 1 through 65535.
6 Click to save your changes.