Filter
Top Products
Fast SwitcHub-2se User’s Guide
Setup and Configuration 2-7
Selections Available
This section shows the information available for each display mode and the
corresponding LED indicators. The display functions are listed here in the
sequence selected by the configure button. For a more detailed description of
these indicators, refer to Chapter 3.
Bandwidth Utilization
Active LED: Util% (ON)
In this mode, the statistical indicators show the percentage of valid data
handled by each port on the switch compared to available bandwidth.
Packet Forwarding Ratio
Active LED: Forward% (ON)
In this mode, the statistical indicators show the percentage of packets that must
be forwarded by bridging hardware to the other port on the switch.
Packet Filtering Ratio
Active LED: Filter% (ON)
In this mode, the statistical indicators show the percentage of packets that must
be filtered from the switch by hardware because the destination address is on
the same segment connected to the receiving port (i.e., in the same segment
with the source address).
Collision Ratio
Active LED: Coll% (ON)
In this mode, the statistical indicators show the percentage of packet collisions
occurring out of the total packets transmitted by the respective port.