Filter
Top Products
Configuring the Switch
3-94
3
information that would make it return to a discarding state; otherwise, temporary
data loops might result.
• Root Hold Time – The interval (in seconds) during which no more than two bridge
configuration protocol data units shall be transmitted by this node.
• Max hops – The max number of hop counts for the MST region.
• Remaining hops – The remaining number of hop counts for the MST instance.
• Transmission limit – The minimum interval between the transmission of
consecutive RSTP/MSTP BPDUs.
• Path Cost Method – The path cost is used to determine the best path between
devices. The path cost method is used to determine the range of values that can
be assigned to each interface.
Web – Click Spanning Tree, STA, Information.
Figure 3-54. STA Information