Filter
Top Products
FS-8700-48 Fike Cheetah Manual Page 29 of 36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll Free: 888-509-1970 email: support@fieldserver.com
# Description Notes
132
enabled loop 1 loop 1 has been enabled.
133
disabled loop 1 loop 1 has been disabled.
134
enabled loop 2 loop 2 has been enabled.
135
disabled loop 2 loop 2 has been disabled.
136
enabled loop 3 loop 3 has been enabled.
137
disabled loop 3 loop 3 has been disabled.
138
enabled loop 4 loop 4 has been enabled.
139
disabled loop 4 loop 4 has been disabled.
140
enabled zone ----- zone enabled. zone number appended to this message.
141
disabled zone ----- zone disabled. zone number appended to this message.
142
enabled ckt -----
board level output circuit enabled. circuit number appended to this
message.
143
disabled ckt -----
board level output circuit disabled. circuit number appended to this
message.
144
loop 1 calibration all configured analog devices on loop 1 have been calibrated.
145
loop 2 calibration all configured analog devices on loop 2 have been calibrated.
146
loop 3 calibration all configured analog devices on loop 3 have been calibrated.
147
loop 4 calibration all configured analog devices on loop 4 have been calibrated.
148
l1 open class a class a wiring has an open circuit trouble - loop 1.
149
l2 open class a class a wiring has an open circuit trouble - loop 2.
150
l3 open class a class a wiring has an open circuit trouble - loop 3.
151
l4 open class a class a wiring has an open circuit trouble - loop 4.
152
l1 class a restored class a wiring trouble has restored to noramal - loop 1.
153
l2 class a restored class a wiring trouble has restored to noramal - loop 2.
154
l3 class a restored class a wiring trouble has restored to noramal - loop 3.
155
l4 class a restored class a wiring trouble has restored to noramal - loop 4.
156
walktest active panel has enterred the walktest mode.
157
walktest expired walktest mode has expired.
158
cfg resto 1: mr-----
config error #1 restored.
zone number appended to this
message.
159
cfg error 1: mr-----
config error #1 (no manrel in this zone). zone number appended to this
message.
160
cheetah network device clear
161
cheetah network device activation
162
config resto 3: al v config error #3 restored.
163
config error 3: al v
config error #3 (alarm verification on device in a suppression zone)
trouble.
164
system power low system power below voltage level for reliable operation.
165
system power ok system power low trouble restored.
166
checksum error -----
config checksum error trouble: devices & loops (loop number
appended).
167
checksum ok -----
config checksum error trouble restored: devices & loops (loop number
appended).
168
checksum ok -----
board level output config checksum restored. circuit number appended to
this message.
169
checksum error -----
board level output config checksum error. circuit number appended to
this message.
170
password level 1 password level 1 enterred.
171
password level 2 password level 2 enterred.
172
password level 3 password level 3 enterred.