Filter
Top Products
FS-8700-48 Fike Cheetah Manual Page 30 of 36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll Free: 888-509-1970 email: support@fieldserver.com
# Description Notes
173
password level 4 password level 4 enterred.
174
password level 5 password level 5 enterred.
175
password expired password has timed-out.
176
software error erroneous interrupt source or illegal program instruction fetched.
177
keyword error erroneous program flow.
178
wiring fault restore frcm/som/srm wiring fault restored to normal.
179
config resto 4: sens config error #4 restored
180
config error 4: sens config error #4 (analog phot has too high alarm sensitivity)
181
bat1 charge volt low battery #1 charger has a low voltage output
182
bat1 charge restored
battery #1 chrager has returned to normal voltage output
183
bat2 charge volt low battery #2 charger has a low voltage output
184
bat2 charge restored
battery #2 chrager has returned to normal voltage output
185
cfg resto 5: w------ config error #5 restored. zone number appended.
186
cfg error 5: w------ config error #5 (watermist zone needs an srm). zone number appended.
187
cfg resto 6: w------ config error #6 restored. zone number appended.
188
cfg error 6: w------ config error #6 (watermist zone has an abort). zone number appended.
189
cfg resto 7: on-time config error #7 restored
190
cfg error 7: on-time config error #7 (srm assigned to watermist & zone has no on-time)
191
cfg resto 8: zn-type config error #8 restored.
192
cfg error 8: zn-type config error #8 (srm assigned to watermist & alarm type of zone).
193
pc configuring panel configuration is currently being changed by the pc
194
pc configuring done the pc has finished configuring the panel
195
history is erased the history buffers have been erased
196
cfg resto 10: vesda# config error #10 restored
197
vesda commun error
communication to the vesda hli device has failed
198
vesda commun
restore
communication to the vesda hli device has restored to normal
199
cfg error 10: vesda# config error #10 (two vesda's with the same unit number)
200
alert level restore
vesda detector alert level restored. analog data appended to this
message
201
alert 0.000%/0.000%
vesda detector alert level activated. analog data appended to this
message
202
action level restore
vesda detector action level restored. analog data appended to this
message
203
action
0.000%/0.000%
vesda detector action level activated. analog data appended to this
message
204
fire-1
0.000%/0.000%
vesda detector fire 1
level activated. analog data appended to this
message
205
fire-2
0.000%/0.000%
vesda detector fire 2 level activated. analog data appended to this
message
206
vesda fault: major vesda detector trouble
207
vesda clear: major vesda detector trouble
208
vesda fault: minor vesda detector trouble
209
vesda clear: minor vesda detector trouble
210
vesda fault: isolate vesda detector trouble
211
vesda clear: isolate vesda detector trouble
212
vesda fault: system vesda detector trouble
213
vesda clear: system
vesda detector trouble
214
vesda fault: zone vesda detector trouble
215
vesda clear: zone vesda detector trouble