Filter
Top Products
Chapter 3 System Housing
3-9
4. Insert the drive into the drive bay and secure it with two screws.
5. Connect the diskette drive cables.
3.4.2 5.25-inch Drives
You may install a CD-ROM, tape drive, hard disk, diskette drive or any other
5.25-inch device into the drive bay.
1.
Open the front panel. See section 5 for more information on opening the
housing panel.
2.
Remove the screws attaching the 5.25-inch drive frame (2 pieces) to the
housing.
3.
Secure the drive guides on the sides of a 5.25-inch drive.