Acer 1100 Series Server User Manual


 
Altos 1100 Series User’s Guide2-6
2.2.7 Floppy Drive B
This parameter specifies the system’s current floppy drive B settings. For
information on how to configure the floppy drives, see section 2.4.1.
2.2.8 IDE Primary Channel Master
This parameter specifies the current configuration of the IDE device connected to
the master port of the primary IDE channel. For information on how to configure
IDE devices, see section 2.4.2.
2.2.9 IDE Primary Channel Slave
This parameter specifies the current configuration of the IDE device connected to
the slave port of the primary IDE channel. For information on how to configure
IDE devices, see section 2.4.2.
2.2.10 IDE Secondary Channel Master
This parameter specifies the current configuration of the IDE device connected to
the master port of the secondary IDE channel. For information on how to
configure IDE devices, see section 2.4.2.
2.2.11 IDE Secondary Channel Slave
This parameter specifies the current configuration of the IDE device connected to
the slave port of the secondary IDE channel. For information on how to configure
IDE devices, see section 2.4.2.
2.2.12 Total Memory
This parameter specifies the total system memory. The memory size is
automatically detected by BIOS during the POST. If you install additional
memory, the system automatically adjusts this parameter to display the new
memory size.