Acer 1100 Series Server User Manual


 
Index
3
Memory configurations, 1-17
Memory parity mode, 2-7
Memory test, 2-19
Memory upgrade, 1-17
Configurations, 1-17
DIMM, installing, 1-18
DIMM, removing, 1-18
System, reconfiguring, 1-19
Memory/cache configuration, 2-33
Cache scheme, 2-33
Internal cache, 2-33
Memory at 15MB-16MB reserved
for, 2-34
Memory ECC mode, 2-34
Single processor MP table, 2-34
System BIOS cacheable, 2-34
Video BIOS cacheable, 2-34
N
Num lock after boot, 2-19
O
Onboard devices configuration, 2-22
Onboard Ethernet chip, 2-28
Onboard floppy disk controller, 2-
27
Onboard IDE primary channel, 2-
27
Onboard IDE secondary channel,
2-28
Onboard PS/2 mouse, 2-28
Onboard USB, 2-7, 2-28
Operation mode, 2-27, 2-43
Parallel port, 2-7, 2-25
Serial port 1, 2-7, 2-23
Serial port 2, 2-7, 2-24
SMBUS interrupt, 2-28
Onboard USB, 2-7, 2-28
Opening the housing panels, 3-6
Front panel, 3-3, 3-6
Left panel, 3-7
P
Parallel port, 2-7, 2-25
Base address, 2-24, 2-25
IRQ, 2-24, 2-25
PnP/PCI system configuration, 2-29
Graphics aperture size, 2-32
PCI device latency timer, 2-31
PCI IRQ settings, 2-30
PCI IRQ sharing, 2-31
Plug and play OS, 2-32
Reset resource assignments, 2-32
VGA palette snoop, 2-32
Pointing device, 2-7
Post-installation instructions, 1-12
Power management, 2-16
mode, 2-16
Power switch < 4 sec, 2-17
Wakeup event, 2-17
Power management mode, 2-16
IDE hard disk standby timer, 2-16
Stop CPU clock in sleep state, 2-17
System sleep timer, 2-17
Power switch < 4 sec., 2-17
Power-on password, 2-43
Pre-installation instructions, 1-11
Processor, 2-4
Processor speed, 2-5, 2-35
Product information, 2-8
BIOS release date, 2-9
Main board ID, 2-9