Filter
Top Products
Altos 1100E Series User’s Guide
4-2
Table 4-1 Default Settings for SCSI Controller and All Devices
Global Settings for SCSI Controller and All Devices Default Value
Host Adapter SCSI ID 7
SCSI Parity Checking Enabled
Host Adapter SCSI Termination Automatic
Boot Channel/ Boot SCSI I/O A/0 (zero)
Host Adapter BIOS
1
Enabled
Support Removable Disks Under BIOS as Fixed Disks Boot only
Extended BIOS Translation for DOS Drives > 1 Gbyte Enabled
2
Display <Ctrl-A> Message During BIOS Initialization Enabled
BIOS Support for Bootable CD-ROM Enabled
BIOS Support for Int13 Extensions Enabled
Individual Settings for Each SCSI Device Default Value
Initiate Wide Negotiation Yes
Maximum Sync Transfer Rate 80 MBytes/sec.
Enable Disconnection Yes
Send Start Unit Command
1
Yes
Initiate Wide Negotiation Yes
1
Settings are valid only if host adapter BIOS is enabled.
2
Do not change this setting from the default.