Filter
Top Products
Altos 1100E Series User’s Guide3-16
3.5 Power Management
The Power Management menu lets you configure the system power management
features.
The following screen shows the Power Management parameters with their default
settings:
Power Management Page 1/1
Power Management Mode.................. [Disabled]
IDE Hard Disk Standby Timer......... [---]
System Sleep Timer.................. [---]
Stop CPU Clock in Sleep State.... [---]
Power Switch < 4 sec. .............. [Power Off]
Wakeup Event
Modem Ring.......................... [Disabled]
↑↓ = Move Highlight Bar, → ← = Change Setting, F1 = Help
3.5.1 Power Management Mode
This parameter allows you to reduce power consumption. When this parameter is
set to Enabled, you can configure the IDE hard disk and system timers. Setting to
Disabled deactivates the power management feature and all the timers.
IDE Hard Disk Standby Timer
This parameter allows the hard disk to enter standby mode after inactivity of 1 to
15 minutes, depending on your setting. When you access the hard disk again,
allow 3 to 5 seconds (depending on the hard disk) for the disk to return to normal
speed. Set this parameter to Off if your hard disk does not support this function.