Filter
Top Products
Chapter 2 – System Board 2-21
2.11.3 Removing a DIMM
To remove a DIMM, press the holding clips on both sides of the socket outward to
release the DIMM.
Place your forefingers on the top of the DIMM
before you press the holding clips to gently
disengage the DIMM from the socket.
Figure 2-8 Removing a DIMM
2.11.4 Reconfiguring the System
Reconfigure the system after installing or removing DIMMs.
Follow these steps to reconfigure the system:
1. Power on the system.
A memory error message appears, indicating that the total memory does not
match the value stored in CMOS.
2. Press
+ + .
3. Press
twice to exit Setup and reboot the system. The system boots with
the new memory configuration.