Filter
Top Products
Chapter 3 - BIOS Utility 3-13
To configure an IDE device designated as master:
1.
Select the IDE Primary Channel Master (or the IDE Secondary Channel Master)
option to display its menu.
2.
Highlight the parameter Type, then press
or to display the IDE drive
types with their respective values for cylinder, head, sector, and size.
You may do any of the following:
•
Select the type that corresponds to your IDE hard disk drive.
•
If you do not know the exact type of your IDE device, select the Auto
option to let the BIOS utility automatically detect the installed IDE drive
type.
•
You may save the values under the option User. The next time you boot
the system, the BIOS utility does not have to auto-configure your IDE
drive as it detects the saved disk information during POST.
We recommend that you copy the IDE disk
drive values and keep them in a safe place in
case you have to reconfigure the disk in the
future.
•
If you have installed an IDE hard disk that was previously formatted but
does not use the disk native parameters or structure, i.e., the disk may be
formatted according to the user-specified number of cylinders, heads,
and sectors, select the User option. Then enter the appropriate drive
information.
•
If there is no device connected, choose None.