Filter
Top Products
Chapter 3 55
General Information
This chapter contains step-by-step procedures on how to disassemble the Acer Aspire iDea desktop for
maintenance and troubleshooting.
To disassemble the computer, you need the tools below:
• Wrist ground strap and conductive mat for preventing electrostatic discharge
• Small Philips screw driver
• Plastic flat head screw driver
Note: The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatch when putting back the components. When you
remove the stripe cover, please be careful not to scrape the cover.
Before You Begin
Before proceeding with the disassembly procedure, you have to make sure that:
1. The system and all peripherals are powered off.
2. The AC adaptor and all power and signal cables from the system are unplugged.
Note: There are several types of screws used to secure the main unit. The screws vary in length. Group the
same type of screws together during the disassembly procedure. Please also remember the screw location for
each screw type. If you fasten the screws on the wrong location, the long screws may cause irrecoverable
damage to the parts.
Machine Disassembly and Replacement
Chapter 3