Filter
Top Products
106 Chapter 3
Replacing the TouchPad Bracket
IMPORTANT: The TouchPad cannot removed from the Upper Cover. Replace the entire Upper Cover if the
TouchPad malfunctions.
1. Insert the TouchPad Bracket into the upper cover so the tabs slide into the securing slots in the upper cover.
3. Run the Conductive cable along the cable channel
using all the cable clips.
4. Run the LVDS cable along the cable channel using
all the cable clips.
5. Connect the LVDS cable to the Mainboard as
shown.
6. Connect the Conductive cable to the Mainboard as
shown.