Filter
Top Products
7-7 User Guide for AIR-104/AIR-204
show arp table
Example:
Command> show arp table
110.0.0.1 at 00:60:20:00:00:15 permanent
110.0.0.2 at 00:40:33:3D:D5:DB
Description:
This command displays the ARP (Address Resolution Protocol) cache table,
which contains up to 16 most recent MAC-to-IP-address mappings that have not been
aged out.
show icmp statistics
Description
: This command displays statistical information associated with the Internet
Control Message Protocol (ICMP).
Received Transmitted
------------------------------------------------------------------------------------------------------------
Dest Unreachable: 0 0
Time Exceeded: 0 0
IP Header Error: 0 0
Source Quench: 0 0
Redirect: 0 0
Echo Request: 0 0
Echo Reply: 0 0
Timestamp Request: 0 0
Timestamp Reply: 0 0
Address Mask Request: 0 0
Address Mask Reply: 0 0
Calls to icmp error: 0
Messages Reflected: 0
show ip
Description:
This command displays all interfaces on which IP routing has been enabled.
Example:
AIR101> show ip
Admin. Oper. Destination/
Ifname State State IP Address Netmask Broadcast Addr
------------------------------------------------------------------------------------------------------------
lan Enabled Up 192.168.168.13 255.255.255.0 255.255.255.0
isp1 Enabled Inactive (Unnumbered)
MIP1 Enabled Inactive (Unnumbered)
show ip isp1
show ip isp2
Chapter 7 Command Line Interface