Acer B223W Computer Monitor User Manual


 
Acer Acer –LCD-B223W
3
01 Product Specification
1. General:
BV223W series LCD monitor is designed with a wide screen 22.0” WSXGA+ TFT LCD panel, LVDS interface, Analog RGB
signal input.
It featured with embedded universal AC power supply. This monitor can support maximum resolution up to 1680 x
1050@60Hz.
Details in this document DVI referred to is an option function depending on client’s requirement. In our factory, products
should be distinguished by module names.
1.1 Main Features
Maximum resolution : 1680 x 1050 @ 60Hz
Back light system : 4 CCFL (top & bottom edge side)
Pixel pitch : 0.282 (H) x 0.282 (V)
Display area : 473.76(H)x296.1(V) 22.0 inch diagonal
Brightness : 250cd/m²
Contrast ratio : 1000
׃1 (typ.) (1)
Response time (Tr+Tf) : 5ms (typ.) (2)
Viewing angle : 160°(H)/ 160°(V), typ (3)
Input interface : Analog (D-sub 15 pin)
Digital Option(DVI-D 24 pin)
Power management : Compatible with VESA DPMS
Plug & Play : VESA DDCCI
OSD language : English,
French, Spanish, Italian, Deutsch, Simplified Chinese,
Traditional Chinese, Japanese (Dutch,
Finnish, Russian depend on sale region)
Universal AC power supply
Note (1)(2)(3): This item spec depend on the LCD panel.
1.2 Accessories
AC Power Cord : 1.8 m. (Black. Cord type depend on sale region)
VGA cable : 1.8 m. (15 pin D-SUB, black cable with blue male connector)
User manual : English (640Mb CD)
Warranty card
DVI cable (option) : 1.8 m. (18+1 pin, black cable with white connector)
2. Operation Specifications
The unit should suffer no visible cosmetic damage and should operate with no degradation in display quality during
exposure to the operating conditions and after exposure to the non-operating conditions, in any sequence.
2.1.1 Operating:
Temperature range : 0°C to 40°C
Relative humidity : 20% to 90%
2.1.2 Storage
note 1
:
Temperature range : -20°C to 60°C
Humidity range : 10% to 90%
2.1.3 Altitude
note 2
Operating 10000 ft (Ta=50, t=24h)
Storage 40000 ft (Ta=30, t=24h )
Note 1: Temperature and relative humidity range must be in the area shown as the following figure due to panel limited