Filter
Top Products
PANEL PC 1000 All-in-One PANEL PC User’s Manual
System Installation
9
C h a p t e r 3
System Installation
This chapter describes the installation and the cable connection to the
system connectors. See system board User’s Manual that came with
your PANEL PC packaging for more details. Sections in this chapter
includes
$"CPU
$"DRAM
$"HDD
$"4 x Serial
Ports
$"Parallel Port
$"VGA
$"Ethernet
$"Digital I/O
$"Keyboard
$"PS/2 Mouse
$"External FDD
$"Expansion
Slot
$"System O/S
and
Software
Installation
The PANEL PC 1000 has a Pentium III little board with a free PCI/ISA
slot inside. It already builds in a Pentium III CPU, relevant DRAM and
a 2.5” HDD. These are all standard and the system is ready to play.
System performance can be increased by upgrading to a higher
performance CPU, higher capacity DRAM modules and hard disk
drive. The user can use the I/O ports located at the back side of the
chassis to connect external peripheral devices, such as a monitor,
serial devices, parallel printer…etc.
NOTE:
Make sure the power cord is disconnected before any
installation. To install any internal device such as CPU,
DRAM and HDD, take out the rear chassis cover first.