Filter
Top Products
6 Troubleshooting
108
If you still encounter problems after going through the corrective measures, please
contact your dealer or an authorized service center for assistance. Some problems
may be solved using the BIOS Utility. See “BIOS Utility” on page 88.
Missing operating system Press F2 (during POST) to enter the BIOS Utility; then
press Esc to exit and reconfigure the computer.
Non-system disk or disk
error. Replace and strike
any key when ready.
Insert a system (bootable) diskette in the floppy drive (A:),
then press Enter to reboot.
Pointing Device Error Contact your dealer or an authorized service center.
Pointing Device Interface
Error
Contact your dealer or an authorized service center.
Protected Mode Test Fail Contact your dealer or an authorized service center.
RAM BIOS Bad Contact your dealer or an authorized service center.
RAM Parity Error Contact your dealer or an authorized service center.
Real-Time Clock Error Press F2 (during POST) to enter the BIOS Utility; then
press Esc to exit and reconfigure the computer.
Video RAM BIOS Bad Contact your dealer or an authorized service center.
Error Messages Corrective Action