Filter
Top Products
2 Operating on battery power
44
Display standby mode
Screen activity is determined by the keyboard, the built-in touchpad, and an
external PS/2 pointing device. If these devices are idle for a specified period, the
display shuts off until you press a key or move the touchpad or external mouse.
The computer has a unique "automatic dim" power-saving feature. When the
computer is using AC power and you disconnect the AC adapter from the
computer, it automatically dims the LCD backlight to save power. If you reconnect
AC power to the computer, it automatically adjusts the LCD backlight to a brighter
level.
Hard disk standby mode
The hard disk enters standby mode when there are no disk read/write operations
within a specified period of time. In this state, the power supplied to the hard disk
is reduced to a minimum. The hard disk returns to normal once the computer
accesses it.
Setting power management schemes
Power management schemes allow you to specify the degree of power
management to use on your computer at any particular time, simply by pressing the
power management scheme toggle hot key
Fn-F3
.
Note:
When an external keyboard is attached to the computer, this feature is
disabled. The feature is also disabled if the operating system does not
support it.