Filter
Top Products
Chapter 3 79
4. Pull the socket lever up to 90 degree and then pull out the CPU from the socket.
5. Put the socket lever back to the original position.
Removing the Internal Cables/Connectors and Memory
1. Disconnect the front panel audio connector from the main board.
2. Disconnect the two front USB connectors from the main board.
3. Disconnect the LAN LED connector from the main board.
4. Disconnect the one button recovery connector, chassis intrusion switch connector, front panel connectors,
and system fan connector from the main board.
Removing the System Fan, Power Supply and Main Board
1. Remove the four screws holding the system fan.
2. Take out the system fan.