Filter
Top Products
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 6415
15” Fanless Panel PC
4.10 Mounting the System
WARNING!
When mounting the flat panel PC onto an arm, onto the wall or into a wall, it is better to
have more than one person to help with the installation to make sure the panel PC does
not fall down and get damaged.
The methods of mounting the PC Series-N270 are listed below.
" Wall mounting
" Arm mounting
" Rack mounting
The mounting methods are described in the following sections.
4.10.1 WALL SURFACE MOUNTING
To mount the panel PC onto a wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four bracket screw holes on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them.
Step 6: Insert the four monitor mounting screws provided in the wall mounting kit into
the four screw holes on the real panel of the flat panel PC and tighten until the screw
shank is secured against the rear panel (Figure 4-16).
Step 7: Align the mounting screws on the monitor rear panel with the mounting holes
on the bracket.
Step 8: Carefully insert the screws through the holes and gently pull the monitor down-
wards until the monitor rests securely in the slotted holes (Figure 4-16).
Ensure that all four of the mounting screws fit snuggly into their respective slotted holes.