Acroprint TQ600 Clock User Manual


 
- 24 -
User Verification Types
Fingerprint Verification
There are (3) fingerprint verification (“authentication”) types:
1:1 Verification (“One to One” Verification)
In this mode, a user enters their 5-digit User ID and takes a
fingerprint reading. The TQ600 compares their fingerprint to the
fingerprint template of the User ID that was entered, thus a 1:1
comparison. The 1:1 verification method is the fastest verification
method since it only has to compare the user’s fingerprint to one
template stored in the terminal.
1) In the initial interface, enter your ID number and the following
appears:
Note: The User ID is 5 digits. If you enter a number with less
than 5 digits the TQ600 adds 0’s in order to create a 5 digit
User ID, i.e., if you enter “11” the TQ600 will Enroll “00011”.
1:1 FP Match
User ID 00011
ESC OK