Filter
Top Products
138
Actiontec 54 Mbps Wireless DSL Gateway User Manual
139
Appendix G Non-Windows Setup
3. The Network window appears. Select Built-In Ethernet from the “Show”
drop-down list.
4. Select TCP/IP and, from the “Configure” drop-down list, select Using DHCP.
5. Click Apply Now and close the “System Preferences” application. The TCP/
IP settings are configured.
Next, go to “Connecting to the ISP,” below.
Connecting to the ISP
1. Open the Web browser. In the address bar, enter
http://192.168.0.1
then press Enter on the keyboard.