Filter
Top Products
60
Actiontec 54 Mbps Wireless DSL Gateway User Manual
61
Chapter 6 Advanced Setup
☞
Note: Contact the ISP if unsure of the proper configuration.
Specify a Static IP Address
Select this option if the ISP service is configured to use RFC 1483 Bridged or
Routed using a Static IP Address. Enter the IP Address, Subnet Mask, and Default
Gateway Address provided by the ISP in the “Broadband Connection via Static
IP Address” screen, which causes the IP address and routing information to termi-
nate at the Gateway, as opposed to the IP address and routing information being
bridged to terminate at the computer. This allows the use of the router capabilities
for the Local Area Network (LAN).
☞
Note: Contact the ISP if unsure of the proper configuration.