Filter
Top Products
50
Actiontec 54 Mbps Wireless DSL Gateway User Manual
51
Chapter 5 Setting Up Static IP
12. The “Save and Restart” page appears. Click “Save and Restart” to save the set-
tings changed in the Change Admin Password screen.
The Gateway has been configured to support a single static IP address. Once the
Power light stops blinking, the Gateway is ready for use.
Configuring for a Block of Static IP Addresses
To set up the Gateway to use a block of static IP addresses:
☞
Note: To complete this procedure, you must have access to the
Internet Service Provider (ISP) worksheet. If no worksheet has
been provided, contact the ISP.
1. Open the Web browser. In the address bar enter:
http://192.168.0.1
then press Enter on the keyboard.
2. The “Main Menu” screen appears. Select Setup/Configuration.