Filter
Top Products
64
Actiontec 54 Mbps Wireless Cable Router User Manual
65
Chapter 6 Using Utilities
Auto Refresh
To set the Web Activity Log screen to automatically refresh at certain intervals, acti-
vate the circle next to “Auto Refresh Every” at the bottom of the Web Activity Log
screen, then enter a time value (in seconds) in the text box, or click on the down
arrow and select a time value from the menu that appears. The Web Activity Log
will refresh at the chosen interval.
Manual Refresh
To set the Web Activity Log screen to manual refresh, activate the circle next to
“Manual Refresh” at the bottom of the Web Activity Log screen. To refresh the Web
Activity Log screen, click Refresh.
Restore Default Settings
To restore the Router to its factory default settings, select Restore Default Settings
from the “Utilities” screen. When the “Restore Default Settings” screen appears, click
Restore Default Settings. Any changes made to the Router’s settings will be lost and
the factory default settings will be restored. During this process, the Router’s Power
light flashes and the Router is disabled.
N
Warning: Do not unplug the power cord from the Router dur-
ing the Restore Default Settings process. Doing so may result in
permanent damage to the Router.
When the Power light stops flashing and glows steadily green, the Router is fully
operational, and the default settings have been restored.