Actiontec electronic GT701WRU Network Router User Manual


 
84
Actiontec 54 Mbps Wireless Cable Router User Manual
85
Chapter 8 Troubleshooting
Using on Network With Another Router/Gateway
If setting up the Router on a network with another router or gateway, consult
the documentation that came with the other router/gateway to see what kind
of dynamic routing is required to operate it with the Router. Then, go to the
“Dynamic Routing” screen (see “Dynamic Routing” on page 56) to select the
appropriate type of dynamic routing.
Frequently Asked Questions
This section contains a list of common questions concerning the Router, and
answers to the questions.
General
I have run out of Ethernet ports on my Router. How do I add more
computers?
Plugging in an Ethernet hub or switch can expand the number of ports on the
Router. Connect a standard Ethernet cable from the “Uplink” port of the new
hub or switch to the Ethernet port on the Router, then connect additional com-
puters to the Ethernet hub or switch.
Which protocols does the Router support?
The internal LAN connections support multiple protocols (e.g. TCP/IP, NetBEUI,
IPX/SPX, and AppleTalk). The External WAN connection supports only TCP/IP.
Which connection speeds does the Router support?
The LAN connection on the Router supports 10/100 Mbps. The 802.11g wireless
connection supports up to 54 Mbps connection speeds (depending on signal
quality, environmental factors, and physical distance).
Will my Xbox work with the Router?
Yes, the Router is compatible with the Xbox. You will need to set a static IP on
the Xbox in the Xbox live network settings, and forward ports 3074 (both UDP
and TCP), 53 (both UDP and TCP), and 88 (UDP) if you run into DSL resolution
errors.