Filter
Top Products
84
Actiontec 54 Mbps Wireless Cable Router User Manual
85
Chapter 8 Troubleshooting
Is the Router flash-upgradeable? How do I do it?
Yes, the firmware is upgradeable. You can find a link to the firmware site under
“Utilities” in the Web-based configurator (see page 63).
Does the Router function as a DSL modem?
No, the Router does not have a DSL modem built-in.
Do I need a specific cable or DSL modem to use the Router?
No, the Router works with any Ethernet cable, and virtually any cable/DSL
modem.
Wireless
Can I use an 802.11b wireless card to connect to the Router?
Yes, the Router can handle 802.11b cards or 802.11g cards. The 802.11g standard
is backward compatible with the 802.11b standard. The Router can be set up to
handle just “g” wireless cards, just “b” wireless cards, or both.
If I install several Routers in different locations in my building, will they
be able to talk to each other? Will I be able to stay connected as I move
between them?
The Router does not communicate with other access points, since it is a single
access point system. If you install several Router devices and move between cov-
erage areas, your wireless device would actually have to reconnect to a separate
network.
Will cordless phones interfere with the Router?
The Router uses the 2.4 GHz frequency. If your cordless phone uses this fre-
quency, problems may occur. Different cordless phones use different frequen-
cies, and generally include a label stating which frequency they use. If you are
having problems with interference caused by your cordless phone, try changing
the Router’s channel (see “Channel” on page 44). This can sometimes clear up
interference issues. Any wireless device using the 2.4 GHz frequencies can cause
wireless interference.