Filter
Top Products
22
Step 6 When prompted to select the manufacturer and model of the modem, se-
lect “AEI” for manufacturer and “ISA PnP V.90 Fax Modem (LKT)” for
model. Click the OK button. At the next dialog box click the Next button.
Step 7 Windows NT will report successful installation of the modem. Click Fin-
ish.
Step 8 Click on the Modems icon in the Control Panel. Verify that Windows NT
has correctly found the modem information like that shown below should
appear.
Step 9 If you wish to dial into a Windows NT Remote Access Server or wish to
connect to the Internet, you will need to configure Dial-up Networking. In
Control Panel double-click the Network icon. Click on the Services folder
and select Remote Access Service. If the Remote Access Service option is
not listed click on the Add button. Scroll-down the menu and select Re-
mote Access Service. Click the OK button. Windows NT may ask for its
CD-ROM for some files. Insert as required. After you have installed Re-
mote Access Service add the appropriate protocols as directed (i.e. TCP/IP
for Internet Access).