Filter
Top Products
59
Result Codes:
KO0=n
TCENNOC6,3,1=n
RORREesiwrehtO
ATI11 Display Diagnostic Information for the last modem connection
The “ATI11” command displays the following diagnostic information for the last
modem connection. A value of “NA” will be displayed if that parameter is not appli-
cable for that connection.
Table 1. Diagnostic Information
Description Example Comments
Last Connection .34 56K/V.34/V.32 - The last data connection is
successful. Failure-the last data connection
failed.
Initial Transmit Carrier Rate 33600 The upload connection rate after initial nego-
tiation.
Initial Receive Carrier Rate 33600 The download connection rate after initial ne-
gotiation.
Final Transmit Carrier Rate 33600 The last upload connection rate.
Final Receive Carrier Rate 33600 The last download connection rate.
Protocol Negotiation Result V.42 Possible results are: V.42, MNP or noEC
Data Compression Result V.42bis Possible results are: V.42bis, MNP5 or no
Compression.
Estimated Noise Level 10 An average of the squared error between the
received constellation point and the decision
point.
Receive Signal Power Level 20 Receive signal (-dBm)
Transmit Signal Power Level 10 Transmit signal level ( –dBm)
Round Trip Delay (msec) 60 Measured Round Trip Delay in milliseconds
Near Echo Level (-dBm) 39 Measured Near Echo Level