Filter
Top Products
53
\Kn Break Control
Controls the response of the modem to a break received from the DTE or the remote
modem or the \B command. The response is different in three separate states. The
first state is where the modem receives a break from the DTE when the modem is
operating in data transfer mode:
dnammoCtceffE
0K\
ehtottneskaerbon,edomdnammocenil-noretnE
.medometomer
1K\.medometomerotkaerbdnesdnasreffubatadraelC
2K\.0saemaS
3K\.yletaidemmimedometomerotkaerbdneS
4K\.0saemaS
5K\
htiwecneuqesnimedometomerotkaerbdneS
).tluafeD(.ataddettimsnart
The second case is where the modem is in the on-line command state (waiting for AT
commands) during a data connection, and the \B is received in order to send a break
to the remote modem:
dnammoCtceffE
0K\.medometomerotkaerbdnesdnasreffubatadraelC
1K\
.medometomerotkaerbdnesdnasreffubatadraelC
).0saemaS(
2K\.yletaidemmimedometomerotkaerbdneS
3K\
saemaS(.yletaidemmimedometomerotkaerbdneS
).2
4K\.atadhtiwecneuqesnimedometomerotkaerbdneS
5K\
.atadhtiwecneuqesnimedometomerotkaerbdneS
)tluafeD().4saemaS(