Filter
Top Products
84
24. DESIGNING A SPECIAL WEIGHING PAN
A weighing pan specially designed for the balance can be installed.
Design the weighing pan as described below:
Using the pan support
The pan support can be removed.
38mm
38mm
Four points on the peripheral
M3 screw: Length 5 mm or less
Center
M3 flat heat screw
Length 5 mm or less
Weighing
pan
Special weighing pan
(Example)
Weighing unit
Pan support
AD-4212A-100/200
AD-4212B-201/301
Four points on the peripheral
M3 screw: Length 5 mm or less
Two points on the center
M3 flat head screw: Length 5 mm or less
AD-4212B-101/102
26 mm
10 mm
32.8 mm
Weighing pan
Weighing unit
Pan support
Pan support
plate
Special weighing pan
(Example)
AD-4212A-600/1000
For the AD-4212A-600/1000,
remove the screws to remove
the pan support plate and the
pan support.