A&D AD-4212B-101/102/201/301 Postal Equipment User Manual


 
20
7. CHANGING THE WEIGHING SPEED
The weighing speed can be selected from the following three rates to minimize the influence on
weighing that is caused by drafts and/or vibration at the place where the balance is installed.
Indicator Parameter Speed Stability
FAST Cond 0
MID. Cond 1
SLOW Cond 2
Fast Sensitive value
Slow Stable value
Operation
1 Press and hold the MODE key until RESPONSE is
displayed.
And then, press the MODE key again quickly.
2 Press the MODE key to select a weighing speed. Either
FAST, MID. or SLOW can be selected.
3 After a few seconds of inactivity the balance displays
eend . Then, it returns to the weighing mode and
displays the updated weighing speed indicator. The
weighing speed indicator remains displayed for a while.
Note
The weighing speed can be changed at “Condition
(Cond)” of “Environment, Display (ba5fnc)” in the
function table. For details, refer to “10. FUNCTION
TABLE”.
Weighing speed indicators
Press and hold
the key
Each pressing
switches
the indicators
Release the key
and press again
After a while